Mozzero ® Reduce Your Bad Effect From Smoking

 MOZZERO ®

MOZZERO ® manufactured by FARISSON Bandar Lampung, Indonesia under the supervision of pharmacists by:
- Production License No. 800/0086/III.03.5/I/2009 DHO.
- Inventor & Patent Owner is Dr. Aris Munandar.
- No.Paten: P00200800730.
- Pharmacists / Technical Responsible: Niniek Ambarwati, S.Si.
- Certificate HALAL LP POM MUI-No. 02040001030310.

BENEFITS & APPLICATIONS  

1. Reduce the consumption of excessive Tar and Nicotine in smokers
2. Eliminate the feeling of nausea and headaches from too much smoke
3. Eliminates itching and excessive phlegm in the throat due to smoking
4. Prevents dry lips blackened and smoking-related
5. Removes plaque on the teeth and excessive tobacco odor
6. Respiratory bronchi-oles of smokers
7. The tobacco drying process that uses sugar then MOZZERO helps reduce sugar levels in cigarette smoke, especially for diabetics who still smoke

With full dedication and commitment, I provide solutions for smokers to reduce the risk / impact of smoking, improvements in the delivery of smoking with almost zero effort (MOZ-ZERO) Tar and nicotine inhaled by smokers.

LABORATORY TEST

Cream MOZZERO have smoke points in 240 degrees Celsius, while cigarette smoke is sucked through the filter after filament (combustion) in the range of 60 degrees centigrade, so the cream application MOZZERO filament remained attached to the filter and do not turn into smoke that will be consumed smokers. Test results and testimonials in smokers after application MOZZERO showed that cigarette smoke was more clean (clear) and lighter (light) without reducing the aroma of cigarettes (original).

Now that I feel after the use of this MOZZERO:

• Feel taste softer on my tongue
• My lips not dry anymore
• Can be used up to 80 cigars
• Have no effect by enjoying your cigar

Step to Using MOZZERO

 

I already have hundred of this product. Reseller will be get the discount by buy minimal 50 tubes.

Selengkapnya...

Unique Serial Money OVN 210499

Money is medium of exchange that is widely accepted in payment for goods and services and in settlement of debts. Money also has a special and unique serial number which makes structure of date or initial of name. In this blog, I try to introduce this unique for you. I also ready to sell this unique money. The money that we show is Guarantee Original (can be proved with UV) and in a good condition. 

I have a new collection.
Currency : Indonesia Rupiah
Nominal : 5,000
Serial Number : OVN 210499
It's mean April 21, 1999 (21-04-99) Selengkapnya...

Unique Serial Money KAR 280109

Money is medium of exchange that is widely accepted in payment for goods and services and in settlement of debts. Money also has a special and unique serial number which makes structure of date or initial of name. In this blog, I try to introduce this unique for you. I also ready to sell this unique money. The money that we show is Guarantee Original (can be proved with UV) and in a good condition.  

I have a new collection.
Currency : Indonesia Rupiah
Nominal : 10,000
Serial Number : KAR 280109
It's mean January 28, 2009 (28-01-09) Selengkapnya...

Replica of Prambanan Temple

Prambanan is the ninth century Hindu temple compound in Central Java, Indonesia, dedicated to Trimurti, the expression of God as the Creator (Brahma), the Sustainer (Vishnu) and the Destroyer (Shiva). The temple compound located approximately 18 km east of Yogyakarta city on the boundary between Yogyakarta and Central Java province.

The temple is a UNESCO World Heritage Site, currently is the largest Hindu temple in Indonesia, and is one of the largest Hindu temples in south-east Asia. It is characterised by its tall and pointed architecture, typical of Hindu temple architecture, and by the towering 47m high central building inside a large complex of individual temples.

Here I sell the replica of Prambanan Temple. For further information you can email to thomas.yoga1989@gmail.com

===================================================================================================

Selengkapnya...

Free E-Book of SHAFT

A shaft is a rotating machine element which is used to transmit power from one place to another.

The power is delivered to the shaft by some tangential force and the resultant torque (Ortwisting moment) set up within the shaft permits the power to be transfered to various machines linked up to the shaft.

Link :
SHAFT 

Selengkapnya...

Free E-Book of REALISATION METALS

Joining or realisation metal is used in several condition, here the link

JOINING METAL (Power Point Presentation) 

Selengkapnya...

DB KILLER FOR MUFFLER

A muffler (or silencer or back box in British English) is a device for reducing the amount of noise emitted by the exhaust on most vehicles. On internal combustion engines, the engine exhaust blows out through the muffler. The internal combustion engine muffler or silencer was originally invented by Milton O. Reeves.

Description

Mufflers are typically installed along the exhaust pipe as part of the exhaust system of an internal combustion engine (of a vehicle, or stationary) to reduce its exhaust noise. The muffler accomplishes this with a resonating chamber, which is specifically tuned to cause destructive interference, where opposite sound waves cancel each other out. Catalytic converters also often have a muffling effect. The effect is mainly generated largely by restriction, rather than by cancellation.

Advantages

Mufflers that reduced backpressure relative to earlier models became increasingly available in the late 20th century, and resulted in increased engine efficiency, performance, power output, and simultaneously decreased overall wear and tear on the engines' components, as well as noise to levels in compliance with the law.

Types and Positions of Mufflers
With cars, lengthwise underneath, blowing backwards at the rear:

• To the sides before the rear wheels.

With large diesel-powered trucks:

• Mounted vertically behind the cab
• Crosswise under the front of the cab, blowing sideways.

With motorcycles:

• Usually, beside the engine and rear wheel blowing backwards.
• In more modern motorcycles, under the seat blowing backwards from under the back of the seat. (Under-slung).

Under-engine exhausts first reached popularity with Buell motorcycles, though by 2008 most manufacturers began using the under-engine design as well.

quote from : MUFFLER

Mini-Mufflers

A mini-muffler (also known as a "hotdog" in the auto industry) can be put in place of a normal muffler in a car exhaust system to "enhance" the sound of the exhaust for a car enthusiast. These are smaller, cost usually about half the price of a normal muffler and work in a similar way, but allowing more sound through. Changing the muffler / mini-muffler / catalytic converter combination can change the sound of a car's exhaust system considerably. Deliberately removing a muffler from a "factory" setup or using a muffler that is defective due to rusting risks the resulting noise being over government approved noise levels, and possible action by law enforcers. Nevertheless some motorcycle owners remove their mufflers just to make them louder.

But if  you resist to using mini muffler, I can suggest this stuff for you

It called it DB KILLER (desibel killer) for muffler. Here is the specification

If you using this DB KILLER, your exhaust sound will decrease to 80%. Selengkapnya...

LOW CALORY SUGAR FROM STEVIA REBAUDIANA BERTONI

          Rebiana, a high-purity rebaudioside A, is a natural non-calorie sweetener being commercialized jointly by Cargill, Incorporated and The Coca-Cola Company for food and beverage use. Rebaudioside A is one of the major sweet components of Stevia Rebaudiana (Bertoni), a South American plant. It is a glycoside of the ent-kaurene diterpenoid aglycone known as steviol, and is found in nature accompanied by stevioside and eight other sweet-tasting steviol glycosides (Kinghorn et al., 1999, 2001). It is approximately 200– 300 times more potent than sugar, a sweetening power similar to that of aspartame. 

          Rebiana provides zero calories and has a clean sweet taste with no significant undesirable taste characteristics. Functional in a wide array of beverages and foods, it is also well-suited for blending with other non-calorie or carbohydrate sweeteners. The molecule is stable under dry conditions and, in aqueous food systems, its stability is markedly better than that of aspartame or neotame. Rebaudioside A has been approved for use as a sweetener in a number of countries, including Japan, China, and Brazil. Its unique properties will provide the food technologist with another tool to produce innovative foods and beverages to meet the demand of consumers for great taste without the calories of sugar.

Selengkapnya...

CODE OF ALUMINUM

Here the code for cast alloy aluminum :


    * 1 x x x  for  Al pure(>99%)

    * 2 x x x  for  Al-Cu

    * 3 x x x  for  Al-Si + Cu/Mg

    * 4 x x x  for  Al-Si

    * 5 x x x  for  Al-Mg

    * 7 x x x  for  Al-Zn

    * 8 x x x  for  Al-Sn

    * 9 x x x  for  Al+another metal


Heat treatable : Al-Cu, Al-Si+Cu/Mg; Al-Si, Al-Zn


Non heat treatable : Al-Mg, Al-Sn



Here the code for wrought alloy aluminum :



    * 1 x x x  for  Al pure (>99%)

    * 2 x x x  for  Al-Cu

    * 3 x x x  for  Al-Mn

    * 4 x x x  for  Al-Si

    * 5 x x x  for  Al-Mg

    * 6 x x x  for  Al-Mg-Si

    * 7 x x x  for  Al-Zn

    * 8 x x x  for  Al+another metal


Heat treatable :  Al-Cu, Al-Si, Al-Mg-Si, Al-Zn


Non heat treatable :  Al-Mn, Al-Mg Selengkapnya...

ALTERNATIVE SEQUENCES FOR THE SEPARATION

Here the differences of Plate/Tray Column and Packed Column

Plate/Tray Column

1. Vapor contact better than Packed Column
2. Liquid Hold-Up better than Packed Column
3. Easily to clean up
4. Can be used with the liquid which contain any solid particle
5. The side-stream can be took

Packed Column

1. Channeling and Back-mixing can be happened
2. Less of pressure-drop so its suitable with vacuum operation
3. Its cheaper for corosive fluid
4. Can be built with small diameter
5. Solid particle can stuck the flow-stream
6. Suitable with foaming liquid
7. The tool is not really heavy than Plate/Tray Column

Selengkapnya...

RESPONSIBILITY TO DESIGN TOOL IN CHEMICAL ENGINEERING INDUSTRIES

To design tool we have some responsibility, they are :
- Design intention
- The safety of the equipment
- The safety of the environment

The protection of the tools that we design
1. BPCS (Basic Process Control System)
2. Critical Layer
Critical layer like a warning to the operator that the process is doesn't working well.
Most of chemical industries have alarm to warning the operator. This is called Critical Layer.
Warning alarm has 2 type :
a. SIS (safety Instrumented System) :
The tool is include the alarm and it can solve that problem by itself immediately
b. Operator intervension

Selengkapnya...